Fix HP Printer Alignment Failed Problem
You have bought a new HP printer and are preparing to set-up
it with your system. Ready to put some blank pages on your printer to print
neat-looking documents or awesome photos. When you start printing, an error
suddenly appears on your screen, i.e. ‘HP Printer Alignment Failed’, what to
do?
The question may keep you annoyed and worried after seeing
this particular error message. Don’t worry because some troubleshooting steps
are given below to fix this alignment error.
There can be several reasons behind this alignment error in the HP
printer. To remove such issues immediately, you must call HP
Printer Customer Service Number, and a technical executive will handle
this issue very well and provide you with instant solutions to eradicate it.
What Is The Meaning of ‘Alignment Failed’ In HP Printer?
In short, alignment failure can’t receive ink from the
cartridges. There can be countless reasons ranging from software to hardware
malfunctions. In this blog, you will be reading about the preventive measures
to remove this nasty error. Let’s go through all these troubleshooting steps
one by one.
What
Are The Tips and Tricks To Remove ‘Alignment Failed’ Error in HP Printer?
1. Restart The Printer
It never needs to reset
the printer with strict procedures in a few instances because it can be
appropriately aligned simply through restarting it. The process of resuming the
printer is easy. Switch-off the printer for at least 10 minutes and then again
switch on it if you are not familiar with rebooting steps.
You will be listening to
a whirring sound when you reboot your printer, and it will align the cartridges
and ink properly with the printer. If the problem still pops-up back on your
screen, you have to move
to the next troubleshooting step to resolve it.
2. Remove Plastic Tape From Ink Cartridges
First, you look for the HP
instructions manual to know how to use an HP printer, but you have forgotten to
remove the ink cartridges wrapped in plastic
tape covering the ink-feeding spot.
Follow quick
check by switching-off the printer and taking
out the cartridges and also see for plastic tape covering it. Keep the
ink-toner holes always open because there will be any debris entered inside it and stuck there to block the ink. Re-insert the
cartridges again and then retry printing jobs.
3. Insert Ink Cartridges Appropriately
If ink cartridges are
not inserted accurately, you won’t get a good print. Cartridges need to be pushed
to insert it manually, and if it is not done, don’t hope that cartridges will
move inside the printer automatically. Check the instructions manual to insert
cartridges
●
Switch-off the printer and be sure cartridges are set-up in
order.
●
Then, switch–on it again.
●
Try to push the cartridges in the circular direction if the
printer is kept facing towards the rough side.
You have tried your best to remove ‘Alignment Failure’ in
the HP printer, but you are still frustrated because solutions didn’t provide
you enough support to remove this error. HP
Printer Alignment Failed Problem can now be eliminated through HP
customer support because a technical consultant will guide you to follow some
significant steps to disable this error instantly.
Related Post:
- · how to fix HP Laserjet Printer Error Code 49.XX
- · How to Troubleshoot HP LaserJet Printer fuser error 50.2
- · How to Setup HP Deskjet 3510 Wireless Printer
Comments
Post a Comment